LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2001 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control Modules >> Programming >> Rear Integration Module Set Up
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Integration Module Set Up

NOTE: This procedure is used after replacing Rear Integration Module (RIM). Before replacing RIM, record personalization settings to transfer to new module (if available). See REAR INTEGRATION MODULE  under OPERATION.
  1. Ensure scan tool has been updated with latest software version.
  2. Connect scan tool to Data Link Connector (DLC). DLC is located on lower left side of instrument panel.
  3. Turn ignition switch to RUN position.
  4. Under CHASSIS MAIN MENU, select REAR INTEGRATION MODULE.
  5. Under REAR INTEGRATION MODULE MAIN MENU, select RECALIBRATION.
  6. Follow scan tool instructions to recalibrate automatic level control.
  7. Perform vehicle personalization to reset owner's desired personalization settings. See VEHICLE PERSONALIZATION  and PROGRAMMING PERSONALIZATION FEATURES ON VEHICLES WITHOUT DRIVER INFORMATION CENTER  , or PROGRAMMING PERSONALIZATION FEATURES WITH DRIVER INFORMATION CENTER  , or PROGRAMMING PERSONALIZATION FEATURES WITH SCAN TOOL  .
scientia non olet · About LEMON Manuals