Adding Keys
NOTE:
Up to 10 additional master keys (Black) or valet keys (Gray) may be added using this procedure when a learned master key is available. This procedure adds keys only. Procedure does not erase previously learned keys. Keys to be learned must duplicate mechanical cut of current key. If more than one valet key is to be learned, immediately precede each valet key with a learned master key.
- Using previously learned master key, turn ignition switch to RUN position.
- Turn ignition switch to LOCK position and remove key.
- Within 10 seconds insert key to be learned. Turn ignition switch to RUN position. Vehicle has now learned new key.