Installation Procedure
- Install a stationary window into the opening. Refer to Urethane Adhesive Installation Of Stationary Windows .
- Install the windshield garnish moldings.
- Install the inside rearview mirror. Refer to Rearview Mirror Replacement (DD7) or Rearview Mirror Replacement (UE1) .
- Install the instrument panel upper trim pad.
- Install the rain sensor, if equipped.
- Install the door sealing weatherstrip to the upper pinch weld flange.
- Install the air inlet grille.
- Install the windshield wiper arms.
- Remove the double layer of masking tape from around the perimeter of the painted surfaces and the interior trim.
- Close the hood.