Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Inflatable Restraint Instrument Panel Module Components

Courtesy of GENERAL MOTORS CORP.

Install the I/P module (2) to the cross-car beam (1).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the I/P module mounting fasteners (3).
Tighten: Tighten the fasteners to 10 N.m (89 lb in).
Install the I/P trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
Enable the SIR system. Refer to SIR Disabling and Enabling Zone 5 .