LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2003 >> LeSabre V6-3.8L VIN K >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair >> Dash Integration Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Dash Integration Module Replacement

DASH INTEGRATION MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Before replacement, record the personalization settings to transfer to the new module (if they are available). Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM).
2. Remove the right sound insulator.




3. Remove the dash integration module (DIM) from the bracket by releasing the tab behind the module and pulling downward.
4. Disconnect the electrical connectors (1).

INSTALLATION PROCEDURE




1. Connect the electrical connectors (1).
2. Install the DIM into the bracket.
3. Install the right sound insulator.
4. Reprogram the DIM. Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM). Programming and Relearning
scientia non olet · About LEMON Manuals