Scan Tool Data Definitions
- Lockout Timer
-
The duration of time the system remains in tamper mode The VTD system will disable sampling of the key code for 3 minutes when a tamper is detected.
- Auto Learn Timer
-
The duration of time the system remains in the re-learn wait mode.
- Seed and Key Timer
-
The scan tool displays the time in seconds used by the BCM to learn a valid code from the passlock sensor. The learn procedure consists of 3 seperate periods.
- Passkey Data Voltage
-
Displays the voltage data from the Passkey Sensor to the BCM. The BCM determines if the data received is valid or invalid.
- Security Lamp State
-
Indicates the state of the SECURITY indicator either On or Off.
- His DTC Cyc. Counts.
-
Displays the number of key cycles that have occured in order to clear history DTCs.