LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> Century Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Heated Seat Control Module Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Heated Seat Control Module & Electrical Harness Connector
    GM816209Courtesy of GENERAL MOTORS CORP.
  1. Position the heater module to the front seat.
  2. Connect the electrical harness connector (1) to the heater module (2).
    3. Fig 2: Heated Seat Control Module & Retaining Pin
    GM909553Courtesy of GENERAL MOTORS CORP.
  3. Position the module (1) on the frame and push in to attach the retaining pin (2)
  4. Lower the seat.
  5. Connect the seat electrical harness connector.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the bolts that secure the front bucket seat adjuster to the floor pan.

    Tighten:  Tighten the bolts to 42 N.m (31 lb ft).

  7. Reposition the front seat to the original position.
scientia non olet · About LEMON Manuals