LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Memory Seat Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Position the memory seat module to the bottom of the seat cushion.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the memory seat module fasteners.

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

    3. Fig 1: View of Memory Seat Module
    GM295290Courtesy of GENERAL MOTORS CORP.
  3. Install the electrical connectors to the memory seat module.
  4. Ensure the wiring harness is positioned in the original location.
  5. Install the seat cushion. Refer to Seat Cushion Replacement - Front .
  6. Enable the SIR system. Refer toSIR Disabling and Enabling Zone 7 in SIR.
  7. Calibrate the seat. Refer to Memory Seat Calibration Procedure .
scientia non olet · About LEMON Manuals