LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 3.8L (L36 And L67) >> Repair Instructions >> Accelerator Controls Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
    2. Fig 1: View of Accelerator Control Cable and Accelerator Pedal Lever
    GM65171Courtesy of GENERAL MOTORS CORP.
  2. Remove the accelerator control cable (1) from the accelerator pedal (2) lever.
    3. Fig 2: View of Accelerator Cable
    GM65179Courtesy of GENERAL MOTORS CORP.
  3. Squeeze the accelerator cable cover tangs and push the accelerator cable (1) through the bulkhead.
    4. Fig 3: View of Accelerator Cable, Retaining Clip, and Washer Bottle
    GM65183Courtesy of GENERAL MOTORS CORP.
  4. Remove the accelerator control cable (1) from the retaining clip (2).
  5. Remove the accelerator control cable (1) from the right slot on top of washer bottle (3).
    6. Fig 4: View of Accelerator Cable and Throttle Body Lever
    GM179148Courtesy of GENERAL MOTORS CORP.
  6. Remove the accelerator cable (2) from the throttle body lever (3).
    7. Fig 5: View of Accelerator Cable and Accelerator Control Cable Bracket
    GM179152Courtesy of GENERAL MOTORS CORP.
  7. Remove the accelerator cable (1) from the accelerator control cable bracket (2).
scientia non olet · About LEMON Manuals