Installation Procedure

Fig 1: View of Transmitter Battery & Case

Courtesy of GENERAL MOTORS CORP.

Install the battery (2) with the positive (+) side up.
Use one 3 V CR2032 battery (or the equivalent).
Close the transmitter case (6, 4).

Fig 2: Installing Battery

Courtesy of GENERAL MOTORS CORP.

Ensure that the seal is in position. Align the 2 halves of the case and snap the 2 halves together.
Resynchronize the transmitter.
Replace the batteries when the range of the transmitter decreases to less than 7 m (23 ft).