Installation Procedure

Fig 1: Removing/Installing Yaw Rate Sensor

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the yaw rate sensor nuts (1).
Tighten: Tighten the yaw rate sensor mounting nuts (1) to 6 N.m (53 in. lb).
Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
Install the rear compartment trim. Refer to Compartment Trim Panel Replacement - Rear in Body Rear End.
Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - ABS .