LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> Rainier 5.3 P, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System - 4.2L (Introduction)) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Fuel Tank Module
    GM734434Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sensor (3).
  2. Install the sensor retaining clip.
  3. Connect the electrical connector to the fuel level sensor.
  4. Install the retaining clip to the fuel level sensor electrical connector.
  5. Connect the fuel pump electrical connector.
  6. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
scientia non olet · About LEMON Manuals