Control Module HVAC - Auxiliary

Auxiliary Heater and Air Conditioning Control Module Replacement

Removal Procedure






1. Using a flat bladed tool, carefully pry out on the top of the HVAC control-auxiliary.
2. Remove the HVAC control-auxiliary from the center console/seat.






3. Disconnect the electrical connector.
4 remove the HVAC control-auxiliary.

Installation Procedure






1. Connect the HVAC control-auxiliary electrical connector.






2. Install the HVAC control-auxiliary in the console bottom first.
3. Push in at the top of the HVAC control-auxiliary in order to engage the HVAC control-auxiliary in the console/seat.