LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Allure CX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Floor Shift Control Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the console trim plate. Refer to Trim Plate Replacement - Console Front or Console Replacement - Front Floor in Instrument Panel, Gages and Console.
  2. Remove the console wiring harness.
    3. Fig 1: Removing Console Shift Control Wiring Harness
    GM161196Courtesy of GENERAL MOTORS CORP.
  3. Remove the console shift control wiring harness.
  4. Remove the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement .
  5. Remove the park/lock cable. Refer to Park Lock Cable Replacement .
  6. Disconnect the lightbulb and the retainer from the shiftier.
    7. Fig 2: Console Shift Control Assembly
    GM161200Courtesy of GENERAL MOTORS CORP.
  7. Remove the console shift control retaining nuts.
  8. Remove the console shift control assembly from the vehicle.
scientia non olet · About LEMON Manuals