LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - Introduction) >> Repair Instructions >> Accelerator Pedal Position (APP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.
  1. Remove the left instrument panel (I/P) lower closeout insulator panel.
  2. Disconnect the accelerator pedal position (APP) sensor harness connector.
    Fig 1: APP Assembly
    GM832905Courtesy of GENERAL MOTORS CORP.

    Remove the accelerator pedal mounting bolts.

  3. Remove the APP assembly.
scientia non olet · About LEMON Manuals