LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the cruise control module on the shock tower mounting studs.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the cruise control module retaining nuts.

    Tighten:  Tighten the cruise control module to shock tower nuts to 2 N.m (18 lb in).

  4. Fig 1: Cruise Control Module Retaining Nuts At Shock Tower
    GM294525Courtesy of GENERAL MOTORS CORP.
  5. Connect the electrical connector to the cruise control module.
  6. Fig 2: Cruise Control Cable At Cruise Control Module
    GM294519Courtesy of GENERAL MOTORS CORP.
  7. Install the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement (3.1L) .