Conditions for Running

The engine has been running longer than 10 minutes.
The engine load must be stable.
The idle air control (IAC) position parameter does not change more than 5 counts.
The throttle position (TP) is below 1.5 percent.
The short term fuel trim (FT) is between -20 and +20 percent.
The transaxle is in DRIVE for automatic transaxle, or in NEUTRAL for manual transaxle with the clutch pedal pressed.
The barometric pressure is more than 74 kPa.
The engine coolant temperature (ECT) is between 75-126° C (167-258.8° F).
The engine is in Closed Loop fuel control.
The battery voltage is more than 10.7 volts.
The intake air temperature (IAT) is between -20° C and +100° C (-4° F and +212° F).
The difference between the engine speed and the desired engine speed is less than 200 RPM.
The mass air flow (MAF) is between 3-10 grams per second.