LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Park Avenue Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Removing/Installing Body Control Module
    GM420442Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the BCM (2).
  2. Install the module to the mounting bracket (1).

    Slide the module upward and slightly rearward until locking tabs engage.

  3. Install the right closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
  4. Reprogram the BCM. Refer to Body Control Module Programming and Setup in Programming and Setup.
scientia non olet · About LEMON Manuals