LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Park Avenue Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Memory Seat Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Removing/Installing Memory Seat Control Module
    GM420434Courtesy of GENERAL MOTORS CORP.
  1. Install the memory seat module (1) and the bracket.
  2. Install the 2 rear fasteners to the bracket.
  3. Connect the electrical connector.
  4. Install the seat.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the seat anchor bolts.

    Tighten:  Tighten the seat anchor bolts to 41 N.m (30 lb ft).

  6. Install the 2 front fasteners to the bracket.
  7. Install the front track cover.
  8. Calibrate the seat. Refer to Memory Seat Calibration Procedure .
scientia non olet · About LEMON Manuals