LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Park Avenue Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Repair Instructions >> Accelerator Controls Cable Bracket Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine Mechanical.
    2. Fig 1: Removing/Installing Cruise Control Cable At Bracket
    GM179339Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the cruise control cable (1) from the throttle lever.
  3. Disconnect the cruise control cable (1) from the bracket (2).
    4. Fig 2: Removing/Installing Accelerator Cable
    GM179346Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the accelerator cable (2) from the throttle lever.
  5. Disconnect the accelerator cable (2) from the bracket (1).
    6. Fig 3: Removing/Installing Electrical Wiring Harness At Accelerator Controls Bracket
    GM179374Courtesy of GENERAL MOTORS CORP.
  6. Remove the wiring harness clip (1) from bracket (3) if necessary (VIN K only).
    7. Fig 4: Removing/Installing Accelerator Controls Cable Bracket
    GM12246Courtesy of GENERAL MOTORS CORP.
  7. Remove the two bolts from the bracket.
scientia non olet · About LEMON Manuals