LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Park Avenue Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Removing/Installing Accelerator Pedal
    GM65341Courtesy of GENERAL MOTORS CORP.
  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  2. Remove the E-clip (3) from the pedal (2).
  3. Remove the plastic retainer from inside the pedal.
  4. Remove the accelerator control cable (1) from the pedal by pulling straight out and up towards the top of the pedal.
  5. Remove the accelerator pedal from the brake and accelerator pedal assembly.
scientia non olet · About LEMON Manuals