LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Park Avenue Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine Mechanical.
    2. Fig 1: Removing/Installing Throttle Position (TP) Sensor
    GM894505Courtesy of GENERAL MOTORS CORP.
  2. Remove the throttle position (TP) sensor electrical connector from the TP sensor.
  3. Remove the two TP sensor attaching screws from the TP sensor from the throttle body.
  4. Remove the TP sensor from the throttle body.
scientia non olet · About LEMON Manuals