LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Rendezvous Ultra, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.6L - Introduction >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Fig 1: Identifying Electrical Connector From The Fuel Tank Vapor Pressure Sensor
    GM1404551Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the fuel tank vapor pressure sensor.
  4. Fig 2: View Of Fuel Tank Pressure Sensor
    GM1404558Courtesy of GENERAL MOTORS CORP.
  5. Remove the fuel tank pressure sensor from the fuel sender.