LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2006 >> Allure CX >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Object Alarm Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Locating Rear Parking Assist (RPA) Receiver
    GM1357333Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear window shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
  2. Disconnect the Rear Parking Assist (RPA) receiver electrical connector (2).
    3. Fig 2: Removing/Installing RPA Receiver Fasteners
    GM1357202Courtesy of GENERAL MOTORS CORP.
  3. Remove the fasteners from the RPA receiver.
  4. Remove the receiver from the rear shelf.
scientia non olet · About LEMON Manuals