Installation Procedure
WARNING: This page is about a different car, the 2007 Buick LaCrosse and 2007 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Position the sunroof module to the vehicle roof with an assistant.
- Install the sunroof module bolts.
Tighten: Tighten the sunroof module bolts to 10 N.m (89 lb in).
- Connect the front and rear drain hoses to the sunroof module.
- Connect the electrical connector to the sunroof module.
- Install the sunshade panel. Refer to Sunroof Sunshade Replacement .
- Install the sunroof window. Refer to Sunroof Window Replacement .
- Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process (Existing Motor) or Sunroof Motor/Actuator Initialization/Teach Process (New Motor) .
- Inspect for proper operation of the sunroof. Refer to Sunroof Description and Operation (One Connector System) .
- Install the headliner. Refer to Headlining Trim Panel Replacement .
NOTE:
Refer to Fastener Notice
.