Scan Tool Output Controls
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description 3.8L/4.6L |
|---|---|---|
| Engine Output Controls | GEN L-Terminal | The engine control module (ECM)/powertrain control module (PCM) commands the generator OFF by removing the 5-volt reference signal from the L terminal of the voltage regulator when you select Off. The generator will then stop generating an output voltage. |
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description 4.6L |
|---|---|---|
| Engine Output Controls | Starter Relay Control | The engine control module (ECM) commands the Crank Relay OFF by removing the 12 volts from the control circuit of the Crank Relay when you select OFF. Voltage will then stop flowing through the switch of the Crank Relay. |