LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Battery Current Sensor
    GM1669907Courtesy of GENERAL MOTORS CORP.
  1. Install the battery current sensor by passing the ground end of the negative cable through the sensor.
  2. Wrap electrical tape around the battery current sensor in order to secure the sensor to the negative battery cable.
  3. Install the negative battery cable. Refer to Battery Negative Cable Replacement .
scientia non olet · About LEMON Manuals