Right SOD Sensor Malfunction
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the right SOD sensor.
- Test for less than 5.0 ohms between the ground circuit terminals listed below and ground.
- Right SOD Sensor Terminal 5
- Right SOD Sensor Terminal 6
- If greater than the specified range, test the appropriate ground circuit for an open/high resistance.
- Ignition ON, verify that a test lamp illuminates between the B+ circuit terminal 2 and ground.
- If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.
- If all circuits test normal, replace the right SOD sensor.