LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2007 >> Lucerne CXS >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Configurable Customer Control System >> Repair Instructions >> Steering Wheel Control Switch Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Installing Switch into Steering Wheel
    GM716696Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. Align the switch to the switch opening in the steering wheel.
  3. Snap the switch into the steering wheel.
  4. Fig 2: View of Steering Wheel Bezel and Retaining Screws
    GM720529Courtesy of GENERAL MOTORS CORP.
  5. Install the steering wheel bezel (2).
  6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  7. Install the retaining screws (1) to the steering wheel bezel.

    Tighten:  Tighten screws to 3 N.m (27 lb in).

  8. Install the steering wheel. Refer to Steering Wheel Replacement .
  9. Enable the SIR system. Refer to SIR Disabling and Enabling .