LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2007 >> Rendezvous CX >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Hub & Bearing Assembly - Front
    GM188804Courtesy of GENERAL MOTORS CORP.
  1. Install the hub and bearing assembly (2) to the vehicle. Refer to Wheel Bearing/Hub Replacement - Front .
    2. Fig 2: Front Wheel Speed Sensor Jumper Harness Electrical Connector
    GM385475Courtesy of GENERAL MOTORS CORP.
  2. Install the front wheel speed sensor jumper harness electrical connector (1) to front wheel speed sensor connector (3).
  3. Install the wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.
  5. Turn the ignition switch to the RUN position with the engine OFF.
  6. Perform the Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals