LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2008 >> Allure CX >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Object Alarm Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying RPA Receiver & Fasteners
    GM1357202Courtesy of GENERAL MOTORS CORP.
  1. Install the RPA receiver to the rear window shelf.
  2. Install the RPA receiver fastener.
    3. Fig 2: Locating Rear Parking Assist (RPA) Receiver
    GM1357333Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector (2) to the RPA receiver.
  4. Install the rear window shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  5. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals