LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2008 >> Allure CX >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Object Alarm Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Locating Rear Parking Assist (RPA) Receiver
    GM1357333Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear window shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  2. Disconnect the rear parking assist (RPA) receiver electrical connector (2).
  3. Fig 2: Identifying RPA Receiver & Fasteners
    GM1357202Courtesy of GENERAL MOTORS CORP.
  4. Remove the fasteners from the RPA receiver.
  5. Remove the receiver from the rear shelf.