Installation Procedure

Fig 1: Identifying Coolant Temperature Sensor

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the coolant temperature sensor.
Tighten: Tighten the sensor to 22 N.m (16 lb ft).

Fig 2: Locating Coolant Temperature Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the coolant temperature sensor electrical connector.
Inspect and fill the cooling system as necessary. Refer to Cooling System Draining and Filling (L26, LY7 GE 47716 Fill) or Cooling System Draining and Filling (LY7 Static Fill) .