Fuel Level Sensor Wiring Harness Replacement (RPO NT7)

Fuel Level Sensor Wiring Harness Replacement (RPO NT7)

Removal Procedure




1. Remove the fuel tank. Refer to Fuel Tank Replacement (RPO NT7) (Service and Repair)Fuel Tank Replacement (RPO NU6) (Service and Repair).
2. Disconnect the fuel level sensor wiring harness electrical connectors from the pressure sensor and module.
3. Remove the fuel level sensor wiring harness.


Installation Procedure




1. Install the fuel level sensor wiring harness.
2. Connect the fuel level sensor wiring harness electrical connectors to the pressure sensor and module.
3. Install the fuel tank. Refer to Fuel Tank Replacement (RPO NT7) (Service and Repair)Fuel Tank Replacement (RPO NU6) (Service and Repair).