Installation Procedure
- Install the theft deterrent module onto the ignition lock cylinder case assembly.
- Connect the connector to the theft deterrent module.
- If necessary, connect the connector to the ignition lock cylinder case.
- Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
- Install the upper and lower trim covers. Refer to Steering Column Trim Cover Replacement .
- Enable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling .
WARNING:
Improper routing of the wire harness assembly may damage the inflatable restraint steering wheel module coil. This may result in a malfunction of the coil, which may cause personal injury.