LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.8L - DTC P0016 To DTC P0350 >> DTC P0340 >> Component Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Test

  1. Inspect the CMP sensor for looseness and correct installation.
  2. Connect jumper wires from the CMP sensor connector 12-volt reference CMP sensor terminal C and the low reference CMP sensor terminal B to the CMP sensor. Turn ON the ignition, with the engine OFF.
  3. Connect a DMM to the CMP sensor signal CMP sensor terminal A at the CMP sensor and observe the Duty Cycle. Pass a steel object by the sensor repeatedly. The Duty Cycle should increment.
    • If the Duty Cycle does not increment, replace the CMP sensor.
scientia non olet · About LEMON Manuals