Circuit/System Verification
- If DTC P2108 is also set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If DTC U0107 only is set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Ignition OFF for 30 seconds.
- Ignition ON, observe the TP Sensor 1 and TP Sensor 2 parameters while moving the accelerator pedal to the fully applied position, and back to the at-rest position. The TP Sensor parameters should increase to 100 percent as the accelerator pedal is moved to the fully applied position, and back tot he at-rest position as the accelerator pedal is released.
- Operate the vehicle within the Conditions for Running the DTC, or within the conditions that you observed from the Freeze Frame/Failure Records data.