LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Sunroof System) >> Repair Instructions >> Sunroof Module Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Transfer all necessary parts to the sunroof module.
  1. Remove the sunroof window. Refer to Sunroof Window Replacement .
  2. Fig 1: View Of Sunroof Module Electrical Connector
    GM647217Courtesy of GENERAL MOTORS CORP.
  3. Remove the sunshade panel. Refer to Sunroof Sunshade Replacement .
  4. It is only necessary to lower the headliner. Only do those step in headliner replacement that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement .
  5. Disconnect the electrical connector from the sunroof module.
  6. Fig 2: Identifying Sunroof Module Drain Hoses
    GM791513Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the front and rear drain hoses from the sunroof module.
  8. Fig 3: Identifying Sunroof Module & Components
    GM317129Courtesy of GENERAL MOTORS CORP.
  9. Have an assistant support the sunroof module.
  10. Remove the bolts from the sunroof module.
  11. Remove the sunroof module from the vehicle with an assistant.