LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System & Fuel System - 5.3L - Introduction) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of APP Sensor Assembly
    GM1618780Courtesy of GENERAL MOTORS CORP.
  1. Position the APP sensor assembly to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the APP sensor assembly bolts.

    Tighten:  Tighten the bolts to 5 N.m (44 lb in).

    3. Fig 2: Identifying APP Sensor Electrical Connector
    GM1618756Courtesy of GENERAL MOTORS CORP.
  3. Connect APP sensor electrical connector (1)
  4. Install the left I/P sound insulator. Refer to INSTRUMENT PANEL INSULATOR PANEL REPLACEMENT - LEFT SIDE .
scientia non olet · About LEMON Manuals