Installation Procedure

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Do not use the fuel injector O-ring seals again. Install NEW fuel injector O-ring seals during assembly.

Fig 1: View Of Fuel Rail With Injectors

Courtesy of GENERAL MOTORS CORP.

Lubricate the NEW O-ring seals with clean engine oil.
Install the NEW fuel injector O-ring seals (532, 534) onto the injector, as required.
Install the fuel injector (533), as required
Install the fuel injector retaining clip (521), as required.
Install the fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement .