Front Subframe Mount: Service and Repair

Drivetrain and Front Suspension Frame Insulator Replacement

Special Tools

CH-49384 - Remover/Installer

For equivalent regional tools, refer to Special Tools ().

Removal Procedure

1. Separate the frame from the body approximately 70 mm. Refer to Drivetrain and Front Suspension Frame Replacement ().




2. Remove the bushings using a CH-49384 - remover/installer (2).

Installation Procedure




1. Locate the front bushings as shown.




2. Install the bushings using CH-49384 - remover/installer.
3. Install the frame to the body. Refer to Drivetrain and Front Suspension Frame Replacement ().