Disassembly Procedure
WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the strut from the vehicle. Refer to Strut Assembly Removal and Installation .
- Install the strut (2) in the J 45400 Strut Spring Compressor (1).
- Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.
- Using a socket or a wrench hold the strut rod, use the J 42991 Strut Rod Nut Socket and a ratchet wrench, remove the strut rod nut.
- Remove the strut from the J 45400 Strut Spring Compressor.
- Loosen the compressor forcing screw (1) until the upper strut mount and coil spring (2) may be removed.
- Remove the upper strut mount and the coil spring from the J 45400 Strut Spring Compressor.
NOTE:
The spring is compressed when the strut moves freely.