LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Controls And Fuel - 2.2L - Repair Instructions) >> Repair Instructions >> Accelerator Pedal with Position Sensor Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: APP Sensor
    GM1633085Courtesy of GENERAL MOTORS CORP.
  1. Position the accelerator pedal with sensor.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the accelerator pedal bolts and tighten to 10 N.m (89 lb in).
    3. Fig 2: Identifying Steering Column Filler Panel
    GM1651113Courtesy of GENERAL MOTORS CORP.
  3. Connect the I/P wiring harness electrical connector to the APP sensor.
  4. Install the steering column filler panel. Refer to Steering Column Opening Filler Replacement .
scientia non olet · About LEMON Manuals