Steering Wheel Position Sensor Replacement

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Steering Angle Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the steering wheel inflatable restraint module coil. Refer to Steering Wheel Inflatable Restraint Module Coil Replacement .
1	Steering Wheel Position Sensor Procedure Press in the clip on the inflatable restraint steering wheel module clock-spring coil to remove the sensor. After installation, center the steering angle sensor. Refer to Steering Angle Sensor Centering .

Callout

Component Name

Preliminary Procedure:
Remove the steering wheel inflatable restraint module coil. Refer to Steering Wheel Inflatable Restraint Module Coil Replacement .

Steering Wheel Position Sensor

Procedure

Press in the clip on the inflatable restraint steering wheel module clock-spring coil to remove the sensor.
After installation, center the steering angle sensor. Refer to Steering Angle Sensor Centering .