Windshield Washer Solvent Level Sensor Replacement

WARNING: This page is about a different car, the 2013 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Windshield Washer Solvent Level Sensor & Grommet

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front wheelhouse liner. Disconnect the windshield washer level sensor electrical connector. Place a clean suitable drain pan under the level sensor area in order to contain the loss windshield washer solvent. Use two medium sized flat-bladed tools under the level sensor grommet and pry in opposite directions, disengage the level sensor from the windshield washer container. Remove and discard the level sensor grommet.
1	Windshield Washer Solvent Container Level Sensor
2	Windshield Washer Solvent Container Level Sensor Grommet Procedure Top off the windshield washer solvent container with new windshield washer solvent.

Callout

Component Name

Preliminary Procedure

Remove the front wheelhouse liner.
Disconnect the windshield washer level sensor electrical connector.
Place a clean suitable drain pan under the level sensor area in order to contain the loss windshield washer solvent.
Use two medium sized flat-bladed tools under the level sensor grommet and pry in opposite directions, disengage the level sensor from the windshield washer container.
Remove and discard the level sensor grommet.

Windshield Washer Solvent Container Level Sensor

Windshield Washer Solvent Container Level Sensor Grommet
Procedure
Top off the windshield washer solvent container with new windshield washer solvent.