LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 335 (Programming And Setup - All Systems) >> Repair Instructions >> Engine Control Module Programming and Setup >> Reprogram Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogram Control Module

WARNING: This page is about a different car, the 2013 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

To reprogram an existing ECM, perform the following procedure:

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Engine Control Module - Programming and follow the on-screen instructions.
  3. Clear DTCs after completing the Programming procedure.
  4. Perform the SPS Function Immobilizer Learn and follow the on-screen instructions. Refer to Immobilizer System Component Programming (with BTM) , Immobilizer System Component Programming (without BTM) .
  5. Perform the SPS function Engine Control Module - Configuration & Setup and follow the on-screen instructions, if available.
  6. Clear DTCs after completing the Configuration & Setup procedure.
scientia non olet · About LEMON Manuals