LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Hybrid/EV Energy Storage System) >> Repair Instructions >> Battery Energy Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Battery Energy Control Module Fasteners
    GM2596562Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the from the battery energy control module (2) to the mounting studs and tighten the fasteners (1) to 9 N.m (80 lb in).
    2. Fig 2: Connectors
    GM2596563Courtesy of GENERAL MOTORS COMPANY
  2. Install the connectors (1) and connector (2).
    3. Fig 3: Identifying Connectors Sequence
    GM2596566Courtesy of GENERAL MOTORS COMPANY
  3. Connect the remaining connectors in the above graphic sequence.
  4. Enable the hybrid battery. Refer to High Voltage Enabling .
  5. Program the battery energy control module. Refer to Battery Energy Control Module Programming and Setup .
scientia non olet · About LEMON Manuals