Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition OFF, measure and record the battery voltage at the C1 12V battery terminals. The battery voltage should stabilize between 12.4 and 12.8 V within a few minutes of turning the ignition OFF.
- If not within the specified range, refer to Battery Inspection/Test
- Start and idle the engine, accessories OFF, measure and record the battery voltage at the battery terminals. The voltage should be at least 1 V greater than the voltage measured in step 1 but less than 15 V.
- If not within the specified range, refer to Circuit/System Testing.