LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2012 >> Regal Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Programming And Setup - All Systems) >> Repair Instructions >> Electronic Suspension Control Module Programming and Setup >> Electronic Suspension Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Suspension Control Module Replacement

WARNING: This page is about a different car, the 2012 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.

If the electronic suspension control module or any of the suspension position sensors need to be replaced, the following procedures must be performed:

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Electronic Suspension Control Module - Programming and follow the on-screen instructions.
  3. Perform the SPS function Electronic Suspension Control Module - Configuration & Setup and follow the on-screen instructions.
  4. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals