Battery Tray Replacement

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Battery Tray

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the battery. Refer to Battery Replacement . Unclip the engine control module bracket and set aside. Unclip the battery current sensor, if equipped, from the battery tray and set aside. Unclip the wiring harness retainers and reposition the harnesses.
1	Battery Tray Fasteners (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 14 N.m (124 lb in)
2	Battery Tray

Callout

Component Name

Preliminary Procedure

Remove the battery. Refer to Battery Replacement .
Unclip the engine control module bracket and set aside.
Unclip the battery current sensor, if equipped, from the battery tray and set aside.
Unclip the wiring harness retainers and reposition the harnesses.

Battery Tray Fasteners (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
14 N.m (124 lb in)

Battery Tray